5 min read5 views

How to Read TI's Package Option Addendum and Order the Exact Part

The last pages of every TI datasheet list each orderable code with its status, package, reel, temperature range and marking. How to read them, what R, T, P, G4, .A and /NOPB mean, and where engineers go wrong.

Felix S. Pavel

Founder & Lead Architect

TL;DR: a TI datasheet names a product (TPS7A02, LM358), but you order a code (TPS7A0218PDBVR). The table that ties the two together is the Package Option Addendum at the end of the datasheet. It lists every orderable code with its status, package, reel quantity, temperature range and marking. Read the row, not the product name: codes in the same package can differ in output voltage, temperature range or features, and some rows are already obsolete.

The examples below come from four current TI datasheets: TPS7A02 (SBVS277C), the LM358 family (SLOS068AB), TLV62568 (SLVSD89B) and LM1771 (SNVS446D), a former National Semiconductor part. The rows are copied as printed.

Where it is and what the columns mean

Turn to the pages headed PACKAGE OPTION ADDENDUM and PACKAGING INFORMATION, numbered "Addendum-Page 1" onward. TI regenerates them, so the addendum carries its own print date, often newer than the datasheet revision. The columns, in order:

  • Orderable part number: the code you put on a purchase order.
  • Status: Active, NRND, Obsolete and so on. The footnote points to TI's product life-cycle page, which defines them: Active is released and available; NRND is not recommended for new designs; Obsolete is no longer produced.
  • Material type: Production, or preproduction prototypes.
  • Package | Pins: the package name, TI's package designator in brackets, and the pin count, e.g. SOT-23 (DBV) | 5.
  • Package qty | Carrier: how many parts and on what (large or small tape and reel, tube).
  • RoHS, Lead finish/Ball material, MSL rating/Peak reflow: the footnote says only the lowest MSL level per JEDEC standards is shown when several apply.
  • Op temp (°C) and Part marking: the marking is what is printed on the chip, not the orderable code.

Real rows, as printed

Orderable codeStatusPackage | PinsQty | CarrierOp tempMarking
TPS7A0218DBVRActiveSOT-23 (DBV) | 53000 | LARGE T&R-40 to 1252CDT
TPS7A0218PDBVRActiveSOT-23 (DBV) | 53000 | LARGE T&R-40 to 12521LF
TPS7A0212PYCHRActiveDSBGA (YCH) | 412000 | LARGE T&R-40 to 125A
TLV62568DBVRActiveSOT-23 (DBV) | 53000 | LARGE T&R-40 to 125—
TLV62568DBVTActiveSOT-23 (DBV) | 5250 | SMALL T&R-40 to 125—
LM358DRActiveSOIC (D) | 82500 | LARGE T&R0 to 70LM358
LM358BIDRActiveSOIC (D) | 82500 | LARGE T&R-40 to 85LM358B
LM358DObsoleteSOIC (D) | 8- | -0 to 70LM358
LM1771SSD/NOPBActiveWSON (NGG) | 61000 | SMALL T&R-40 to 1251771S

From the Package Option Addendum of TPS7A02 (SBVS277C), TLV62568 (SLVSD89B), LM358 (SLOS068AB) and LM1771 (SNVS446D). A dash means the cell is blank or not given for that row.

Decoding the suffixes

TI has no single page that decodes every suffix. Most datasheets carry a device-nomenclature table, and TI's reference pages cover the rest. What the sources state:

  • R and T (reel size). TPS7A02's nomenclature table says "R is for reel (3000 pieces), T is for tape (250 pieces)". TI's logic part-number guide (SLYB236) calls them large and small tape and reel. Check the quantity column anyway: TPS7A0212PYCHR is an R code on a 12000-piece reel.
  • Package designators such as DBV, DQN, YCH, D, PW and DGK. Each datasheet pairs them with a package name, e.g. "DBV (SOT-23, 5)" on the TPS7A02 front page. Use the datasheet's own pairing; TI does not publish one master list for all families.
  • Feature and option letters are family-specific. In TPS7A02, the digits after the product give the output voltage ("28 = 2.8 V; 125 = 1.25 V") and P marks the active output discharge option.
  • G4 / E4. SLYB236 says there is no difference in performance between an SN74xxG4 and an SN74xx; TI's product-labeling page describes G4 as the newer label for the former e4 code.
  • Q1. The automotive versions: the LM358 datasheet describes them as Q100 devices qualified for automotive applications (for example LM2904-Q1). The same datasheet also uses "Q1" in its tape table for the pin-1 quadrant, which is unrelated.
  • .A and .B rows. Many addenda now repeat a code with .A or .B. TI's import-details page explains them as alternate manufacturing and import flows of the same device. They can carry a different lead finish from the base code, so check that column if your process cares.
  • /NOPB. Former National Semiconductor codes end in /NOPB, as in LM1771SSD/NOPB. None of these datasheets defines it. TI engineers on TI's E2E forum describe it as lead-free ("no Pb"). Treat that as TI's informal answer, not a specification.

Five ways to order the wrong part

  1. Picking a code by package alone. TPS7A0218DBVR and TPS7A0218PDBVR are both SOT-23 (DBV), 5 pins, 3000 per reel. One has the P (active discharge) option, and they carry different markings: 2CDT and 21LF.
  2. Ignoring the temperature column. In SOIC (D) 8, LM358DR is rated 0 to 70 °C, LM358BIDR -40 to 85 °C and LM258DR -25 to 85 °C.
  3. Copying a dead code. LM358D is printed as Obsolete right above the Active LM358DR. Filter on Status first.
  4. Assuming the reel letter fixes the quantity. The quantity column is the authority, as the 12000-piece YCH reel shows.
  5. Checking the marking against the order code. The marking is a short code (21LF, 1771S), and some rows list several. The footnote says only one of them appears on a given part.

A quick procedure

  1. Choose the product and its options from the datasheet's nomenclature table (voltage, features).
  2. Go to the addendum and keep only Active rows with your package and pin count.
  3. Match the temperature range and any automotive (Q1) requirement.
  4. Pick the carrier you need: large reel, small reel or tube.
  5. Note the marking so incoming inspection knows what to expect.

Other vendors encode the same information differently: ST, for example, puts every package of a part in one pin table and lets the order code pick the column, as shown in One Datasheet, Eight Packages.

This is the same table DatasheetVend reads when it builds library entries from TI datasheets: one entry per product and package, with the other orderable codes in that package listed in the entry, and the package taken from the addendum row rather than guessed. You can browse them in the component library, or run the part decoder on a datasheet to break an orderable code into its options.

FAQ

What does the R at the end of a TI part number mean?

A tape-and-reel package; T is a smaller reel. The exact quantity is in the addendum's Package qty column.

Is a TI part with G4 different from the one without?

TI's logic part-number guide says there is no difference in performance. Check the addendum for status and finish.

What is the .A version of a TI orderable code?

An alternate manufacturing and import flow of the same device, per TI's import-details page. Its lead finish can differ from the base code.

Order the code, not the product name.

A new account gets five free passes. Each pass runs up to two modules, pinout and footprint included, on a PDF up to 25 MB.

Sources

  1. Texas Instruments, TPS7A02 datasheet SBVS277C: device nomenclature (Table 9-1) and Package Option Addendum
  2. Texas Instruments, LM358 family datasheet SLOS068AB: Package Option Addendum and automotive note
  3. Texas Instruments, TLV62568 datasheet SLVSD89B: Package Option Addendum
  4. Texas Instruments, LM1771 datasheet SNVS446D: Package Option Addendum
  5. Texas Instruments, Interpreting TI logic part numbers, SLYB236
  6. Texas Instruments, Product life cycle
  7. Texas Instruments, Import details (.A and .B orderable options)
  8. Texas Instruments, Logo product labeling
  9. TI E2E forum, answer on the /NOPB suffix (LM340 thread)

Was this useful?

A like tells other engineers it is worth their time.

Keep reading

All articles

Cookies. Strictly necessary cookies keep you signed in and remember this choice. Optional analytics (Google, Microsoft, PostHog) show us how the site is used. Cookie details